1. Ultrasonic Flaw Detector
Applications:
- Used for welds inspection;
- Thickness measurements.
Key features:
- Compact design and high durability.
- Allow to split the display screen, display A-trace, B-scan.
- Automatic recognition of type probe.
- Palmtop unit weighing 800 gr including battery
- User friendly menu navigation
- High resolution (800 x 480 pixels) WVGA display
- Removable Micro SD card up to 8 GB
- USB communication port
- Auto plotting dynamic DAC
- Test Range in steel : 0.10” (2.5mm) to 200” (5 M)
- Square Wave Pulser
DAC: Dynamic DAC curve can be Digitally plotted (Smooth parabolic curve) on screen with selectable additional offset curves from 0 to 14 dB selectable steps. DAC curve can be set as flaw monitor gate DAC curve can be plotted using minimum 2 to maximum 10 points
2. Moisture Measurement Gauge utilizing neutron scattering/ Neutron Moisture Gauge
Features:
- Fast and easy to use; allows thousands of feet of insulated pipe to be tested in a day.
- Designed for maximum accessibility in hard-to-reach areas.
- Newly redesigned telescopic pole allows for testing distances of 10+ feet with an easy to replace cable assembly.
- Using the RS-232 C serial interface, the data can be quickly uploaded onto a computer or printer.
Applications:
- Evaluate insulated tanks and vessels quickly for potential corrosion problems.
- Investigate insulated pipe for elevated concentrations of moisture to identify areas for corrosion inspection.
- Quickly detect levels in containment vessels.
Specifications:
- LCD DISPLAY: 8 character display reads in direct count or % volume.
- CALIBRATION: 16 selectable calibrations allow for varying conditions.
- DIRECT SELECTION: Keyboard selection of gauge functions for counting, self-calibration, unit selection, data definition, storage format, and computer serial dump.
- DATA STORAGE: 24,000 cells of counts and key data entry. Operator programmable format.
- DATA OUTPUT: Connection allows users to upload data directly to the computer for data processing and report printout.
- FUNCTION NDT: measurement of insulation materials by manual counts or “quick test” automatic counts.
- RANGE: 0 to 70% moisture
- COUNT TIME: User selectable. Average manual count is 4 seconds.
- POWER: Battery pack of 6 C size cells, Alkaline.
- BATTERY LIFE: 1 to 2 years under normal use.
- ALERTS: Red LED alert light on handle illuminates when elevated moisture is detected.
- UNIT: in/ ft pcf, gcc,%, num.
